To use all function that are offered by MedITEX its important to have a proper hardware.

If you want a fast and easy way to use MediTEX with external devices we highly recommend the hardware that is displayed on this page.

 

Label Printer

Seiko - Smart Label Printer If you want to print your created barcodes or labels for your cryo storage you will need a label printer. There are several typs of this Printer but we think that the 650-model has the best price-performance ratio for MedITEX. Nevertheless if you want to buy the model that fits best to your needs click here. You can check the hardware information of the printer here. To see all kind of supported labels click here.

Card Printer

Zebra - ZXP Series 3 card printer Identity cards are a good solution to catch the most important data and make identification as easy as possible. This card printer is the best solution if you have identity cards in mind. You can decide if you want to print monochrome or full-color / single- or double-sided. We recommend to use 30 mil(0.762mm) PVC cards. You can check the hardware information of the printer here.

Webcam

Logitech c270 (USB Webcam) This cam is the easiest way to take pictures of your patients for MedITEX. The Logitech c270 is a good choice for you if you have one specific spot where all patient images are made. Just plug it in, install the software and adjust the cam to the spot. You dont have to go with this Webcam, any other USB Webcam is fine also. There is no interface between the camera and MedITEX. MedITEX will not recognize this cam. We only offer a purchase proposal / solution. You can check the hardware specifications here.

D-Link DCS-930L (IP Webcam) With this cam you can either monitor some corridors or take pictures of your patients for MedITEX. The DCS-930L is a suitable solution for a terminal environment where USB devices aren't working. You can check the hardware specifications here. There is no interface between the camera and MedITEX. MedITEX will not recognize this cam. We only offer a purchase proposal / solution. There is no direct interface between this cam and MedITEX To see how to use it with MedITEX click here.

Bar Code Reader

Datalogic - QuickScan QD2400 Series A barcode scanner is necessary if you want to use barcodes to improve the workflow in your clinic. It is a 2D scanner which means that next to barcodes, it can also read QR-Codes, Data Matrix, MaxiCode, Aztech Code, Postal Codes and Stacked Codes. We chose the QuickScan QD2400 Series because it's an easy to use, future-oriented, fast scanning device.  It is available with, and without a stand. You can check the data sheet here. Your QuickScan is not working with MedITEX? Check our troubleshooting guide for this scanner here.

 

If you have questions or interest in a device shown here feel free to contact us.

 

Back to top