The configuration of the US device is mandatory to secure the proper functioning of MedITEX DICOM and to establish the communication with MedITEX IVF.

 

In System settings, under DICOM Configuration, the following three services must be entered:

• STORE
• STR.REPORT
• WORKLIST

 

The IP Address that should be used is the IP Address of the server where MedITEX DIOCM Server is installed.

The port has to be 108 (previously configured for MedITEX DICOM).

After the configuraion is done, it is possible to check the connectivity of each entered service by selecting the specific service and clicking on "Test Connection".

 

Back to DICOM Interface