DICOM Configuration

From MedITEX - Wiki

Revision as of 08:23, 22 September 2017 by SlJo (Talk | contribs)

Jump to: navigation, search

In System settings, under DICOM Configuration, the following three services must be entered:

  • STORE
  • STR.REPORT
  • WORKLIST

The IP Address that should be used is the IP Address of the server where MedITEX DIOCM Server is installed.

The port has to be 108 (previously configured for MedITEX DICOM).

After the configuraion is done, it is possible to check the connectivity of each entered service by selecting the specific service and clicking on "Test Connection".