Setting no. 1:

Click on the menu item System -> Configuration / administration -> Settings -> System

-> Functions -> Donation / surrogate motherhood

Click on the menu item System -> Configuration / administration -> Settings -> System

-> System tables-> Donor family slot: max. no. families per country

From the <a href="/index.php?title=Donation">Person and donor information</a> form:

From the <a href="/index.php?title=Donation">Person and donor information</a> form, navigate to:

Donor sale consent -> Maximum donor families per country

When creating a reservation of donated material for a recipient, MedITEX will verify if that donation does not exceed the maximum number of families allowed for that donor. The calculation is done in the following way:

The system checks the recipient's country, and it takes the smallest value from the four system parameters described above. If the new donation exceeds the smallest value, the new reservation will not be possible.

You might see a warning message such as this:

<img style="vertical-align: middle;" src="/images/Warning-DFS-1.png" alt="" width="515" height="147" />

The above image describes 5 available family slots for this donor in the country of Germany.

Two slots are taken. Family number 1, to recipient FR10019, has two cycles. You can expand a family slot by clicking the Plus button on the left side of the screen. It is also possible to see that no material from this donation will be used for further cycles, as the field Remaining material says None.

Family slot number 2 is allocated to recipient FR10018. This record currently has no cycle information and no remaining material.

Three slots (3, 4, and 5) are still available for this donor, for the country of Germany.

The donor family slot form is automatically created when the reservation of donated material is inserted.

Once cycles are documented on the recipient and only after an embryo transfer, the cycle information is automatically updated in the donor family slot record. The cycle information seen on the record comes directly from the recipient cycle.

<p>When the recipient's cycle is performed outside MedITEX, it is possible to create a Donor Family Slot and manually fill out the cycle information.

In order to do that, you must select the reserved material from the recipient's cryo storage and click on thaw.

<img src="/images/Thaw-1-DFS.png" alt="" width="492" height="388" /></p>

Once on the thaw screen, you can tick the box Create donor family slot. The system will then create a new donor family slot from this removal. Only in this case will MedITEX allow you to manually enter the cycle information inside the donor family slot.

<img src="/images/Thaw-2-DFS.png" alt="" width="371" height="163" />