MedITEX IVF Impostazioni

Revision as of 09:54, 13 April 2016

Impostazioni.

Definire la propria struttura.

Le Impostazioni MedITEX IVF sono della massima importanza. Essi consentono di adattare il programma alle condizioni e circostanze specifiche del Centro.

Questo include l'aggiunta o la modifica di farmaci, la gestione dei materiali utilizzati e le interfacce con programmi di laboratorio e di fatturazione, la definizione degli incubatori e l'organizzazione della criobanca. In questa sezione è anche possibile definire campi liberi/QM e il contenuto di particolari tabelle di sistema.

La definizione completa e corretta delle impostazioni è un'attività cruciale da svolgere prima di cominciare ad utilizzare MedITEX IVF.

Clinica

Per modificare le impostazioni della clinica è sufficiente cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Clinica.

Tab Clinica.

Qui si possono inserire i dettagli di contatto del centro e visualizzare l'ID della clinica.

Inserire e modificare l'alias della clinica, il nome del medico responsabile del centro e altri dati.

Se nel Database sono impostate diverse cliniche, è possibile passare da una all'altra premendo il pulsante "Posizione".

I campi disabilitati sono riempiti automaticamente al momento dell'installazione. Se si desidera modificarli contattare l'assistenza.

<a href="#top">Inizio pagina</a>

Sistema

Per modificare le impostazioni di sistema cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Generale.

Generale

Tab Sistema.

Percorsi Sistema: Qui è possibile definire il percorso utilizzato dalle interfacce esterne di programmi di fatturazione e laboratorio e da MedITEX per la conservazione dei file word utilizzabili nel programma e documenti digitali stampati per ogni singolo paziente. Per modificare questo percorso è sufficiente cliccare sull'icone di "cartella" posta sulla destra del campo in questione. Dalla finestra di dialogo che si apre sarà possibile selezionare il nuovo percorso.

Aggiorna generatori tabelle: Cliccando su questo pulsante i generatori delle tabelle che costituiscono il Database di MedITEX verranno aggiornati. Prima di utilizzare questa funzione è necessario accertarsi che nessuno stia utilizzando il software e che tutti gli utenti abbiano effettuato il logoff.

Plausibilità ed esportazioni: Da questa sezione è possibile impostare i messaggi di plausibilità che verranno mostrati nelle varie sezione del programma (per esempio “Lista base Anfomed”). L'opzione DIR (Registro IVF Tedesco) contiene messaggi di plausibilità rilevanti solamente per centri con sede nel territorio Tedesco.
Le opzioni selezionate in questa sezione rappresenterano l'insieme dei messaggi di plausibilità, evidenziati attraverso semafori di color rosso, nelle varie sezioni del programma in caso di informazioni mancanti o erroneamente documentate.

MedITEX IVF controlla i dati in tempo reale, permettendo la visualizzazione automatica dei messaggi di plausibilità al passaggio da una maschera di input all'altra. Se si deseleziona l'opzione "Mostra subito messaggi di warning" questa feature può essere disabilitata.
Importante: Modifiche alle impostazioni di plausibilità possono causare la documentazione di informazioni incorrette.

<a href="#top">Inizio pagina</a>

Funzioni

Generale

Per modificare le impostazioni di funzioni generali cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni ->Generale

Tab Funzioni - Generale.

<img src="/images/Impostazioni_5_IT.png" alt="" width="490" height="160" />	Criteri di ricerca Da questa sezione è possibile selezionare i criteri di ricerca dei pazienti: ID Paziente Cognome Data di Nascita Numero Telefono N° Previdenza sociale ID Coppia
<img src="/images/Impostazioni_6_IT.png" alt="" width="485" height="81" />	Anamnesi Da questa sezione è possibile selezionare il periodo di validità di un anamnesi.
<img src="/images/Impostazioni_7_IT.png" alt="" width="489" height="104" />	Anteprima / Blocco note Se la prima opzione è selezionata un'icona che raffigura una macchinetta fotografica apparirà sulla barra del titolo di alcune sezioni del software la seconda opzione attiva la combinazione di tasti (ALT + Stamp) per la creazione di screenshots.
<img src="/images/Impostazioni_8_IT.png" alt="" width="424" height="473" />	Stampante etichette per Barcode / RFID MedITEX permette: Il Login automatico attraverso un RFID o Codice a barre. L'impostazione della stampante di default per la stampa dei codici a barre. L'impostazione di un Template per l'etichetta contenente il barcode o RFID L'impostazione delle dimensioni della foto del paziente e del logo della clinica in tale template. L'impostazione del solo ID Paziente come codice stampato del Barcode (così facendo tutte le sezioni di MedITEX alle quali associo il barcode saranno identificate con lo stesso codice) L'impostazione della conferma forzata al momento del matching tra ovociti e liquido seminale
<img src="/images/Impostazioni_9_IT.png" alt="" />	Impostazioni Mediaplayer Selezionare la qualità di registrazione dei messaggi vocali La Registrazione è possibile dlle finestre contenenti i <a href="/index.php?title=Free_/_QM_fields">Campi QM</a>.

<a href="#top">Inizio pagina</a>

Generazione ID automatica

Per modificare i criteri di generazione automatica di particolari ID cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni -> Generazione ID automatica

Generazione automatica ID.

<img style="float: left;" src="/images/Impostazioni_11_IT.png" alt="" width="487" height="143" />	ID paziente automatici MedITEX permette la generazione automatica dell'ID Paziente al momento della<a href="/index.php?title=How_to_create_a_new_patient%3F"> creazione di un nuovo paziente</a> se le opzioni "Generazione ID automatico ON, modifiche manuali consentite o non" vengono selezionate e un criterio di generazione scelto.
<img style="float: left;" src="/images/Impostazioni_12_IT.png" alt="" width="485" height="171" />	ID anonimo automatico La regola impostata è rilevante solamente se l'opzione Donatori anonimi è selezionata nella sezione <a href="/index.php?title=MedITEX_IVF_Settings#Donation_.2F_surrogate_motherhood">Donazione/madre in surroga</a>. L'ID Anonimo verrà visualizzato al posto del nome del donatore. Questo ID e modificabile in <a href="/index.php?title=Demographics#Clickable_Areas">Anagrafica</a> nel campo "ID Anonimo".
<img style="float: left;" src="/images/Impostazioni_13_IT.png" alt="" width="489" height="89" />	Codice identificazione coppia automatici MedITEX permette la generazione automatica dell'ID Coppia al momento della <a href="/index.php?title=How_to_create_a_new_patient%3F">creazione di una nuova coppia</a> o di una <a href="/index.php?title=How_to_create_a_new_patient%3F">partnership</a>
<img style="float: left;" src="/images/Impostazioni_14_IT.png" alt="" width="444" height="142" />	Numeri laborder automatici MedITEX permette la generazione automatica del numero di ordine in caso di <a href="/index.php?title=How_to_create_a_new_patient%3F">creazione di un ordine di laboratorio</a> inserendo al codice anche un Prefisso e Suffisso
<img style="float: left;" src="/images/Impostazioni_15_IT.png" alt="" width="443" height="109" />	Regola generazione ID criocarrier quando si congelano più criocarriers Quando <a href="/index.php?title=How_to_create_a_new_patient%3F">più di un criocarrier viene generato</a> da una stessa finestra di dialogo e la generazione automatica dell' <a href="/index.php?title=How_to_create_a_new_patient%3F">ID criocarrier</a> viene attivata MedITEX permette di scegliere la regola con la quale le pailette successive alla prima verranno identificate.
<img style="float: left;" src="/images/Impostazioni_16_IT.png" alt="" width="444" height="94" />	Ulteriore numero identificativo fatturazione Codice utilizzato nell'esportazione delle fatture e pagamenti in Accounting

Report editor

Questa sezione descrive le impostazione per Report editor.

<a href="/index.php?title=Queries_of_Report_editor">Cliccare qui</a> per avere ulteriori informazioni sulle query.

Per modificare le Impostazioni di Report editor cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni-> Report editor.

Tab Funzioni - Report editor.

Template Lettere: In questa sezione è possibile definire le proprietà del logo della clinica che potrà essere inserito nei template delle lettere create con report editor.

Sigla Clinica: Se il centro opera in diverse sedi è possibile creare templete personalizzati per ogniuna delle sedi. I tasti di posizione permettono di selezionare le varie sedi.

Requisiti grafici per segnaposti addizionali: è possibile definire le dimensioni delle immagini di cellule ed ecografie utilizzate nelle lettere e il numero di immagini per riga, permettendo di ottenere sempre un modello uguale di referto.

Impostazioni WOMOD (Moduli word): Creare/Modificare il template di default.

Gestisci lettere: Permette di visualizzare la sezione di amministrazione di tutte le lettere gestite dal programma.

<a href="/index.php?title=Result_management#Administrate_letters">Cliccare qui</a> per avere ulteriori informazioni su Gestisci lettere.

<a href="#top">Inizio pagina</a>

Spermiogramma

Per modificare le impostazioni degli spermiogrammi cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni -> Spermiogramma.

Tab Funzioni - Spermiogramma.

Utilizza linea guida WHO [A+B]: Permette di scegliere tra l'utilizzo di tre o quattro parametri per la motilità - motilità prograssiva (PR), motilità locale (NP) e immotilità (IM) come specificato dalla linea guida WHO attuale per l'analisi del liquido seminale (parametri A e B insieme per calcolo PR, C e D separati per calcolo di NP e IM).

Quality assessment spermiogr.: Attivazione della quality assessment con relativa aggiunta automatica dei dati di default inseriti

Le informazioni su Postazione, esame e metodo d'esame, necessarie per il calcolo e la validazione del liquido seminale, possono essere inserite qui.

Inoltre se necessario è possibile scegliere l'unità di calcolo e adattare il fattore di diluizione e il fattore porzione.

<a href="/index.php?title=MedITEX_IVF_Settings#System_tables"><img style="border: 2px dotted blue; float: left;" src="/images/EditSemen.png" alt="" width="31" height="26" /></a> Permette di spostarsi nella sezione delle tabelle di sistema per aggiungere o modificare postazioni/unità. Successivamente le nuove opzioni potranno essere scelte nella sezione di quality assesment.

Periodo minimo di quarantena per liquido seminale: Giorni di quarantena per il liquido seminale crioconservato. Liquidi seminali di donatori con valori di HEP B, HEP C, TPHA e HIV positivi, o quelli che non hanno raggiunto il periodo minimo di quarantena non possono essere scongelati o utilizzati.

<a href="/index.php?title=Documenting_a_new_sample#Documenting_a_semen_analysis">Cliccare qui</a> per avere ulteriori informazioni sulla documentazione di spermiogrammi.

<a href="#top">Inizio pagina</a>

Ciclo

Per modificare le <strong>impostazioni </strong>dei Cicli cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni ->Ciclo

Tab Funzioni - Ciclo.

Overview Calendario: è possibile impostare i giorni di weekend

<a href="/index.php?title=Cycle_Culture">Coltura</a>: Attivare il calcolo automatico del punteggio e della media nella <a href="/index.php?title=Cycle_Culture#Graphical_representation">Rappresentazione Grafica</a> della coltura.

<a href="/index.php?title=Cycle_Pregnancy">Gravidanza</a>: La settimana gestionale verrà calcolata basandosi sull'opzione scelta in questa sezione. Si possono scegliere 40 o 38 settimane.

<a href="/index.php?title=Cycle_Transfer">Transfer</a>: Seguendo le disposizioni di legge del proprio paese è possibile impostare il numero massimo di embrioni da trasferire.

<a href="#top">Inizio pagina</a>

Farmaco

Farmaco

Contratti crio e fatturazione

Per modificare le <strong>impostazioni </strong>dei Crio contratti e fatture cliccare su Sistema -> Configurazione/Amministrazione -> Impostazioni -> Sistema-> Funzioni ->Contratti crio e fatturazione.

Tab Funzioni - Contratti crio e fatturazione

Attivo-Fatturazione con MedITEX IVF o Accounting: L'opzione Fatturazione con MedITEX IVF è selezionata di default. Permette la creazione di criocontratti e fatture per i pazienti. <strong>Se l'opzione è deselezionata, tutte le funzionalità riguardanti i contratti e la fatturazione saranno disabilitate nel programma.</strong>

Tab Funzioni - Contratti crio e fatturazione --> Impostazioni fatture.

Sezione contratti crio.

Automatically create contract number: if this option is checked, it will apply a predefined rule to generate a number once every <a href="/index.php?title=Create_a_new_entry_in_demographics">cryo contract</a> is created in the <a href="/index.php?title=Demographics">demographics</a>.

Contract types: a list with all types of contracts that can be issued. With the "Plus" button, you can add a new type of contract. Do this by specifying the name, frequency and amount in the new window. Here, you can also set whether a contract is used as a Standard (template for every contract) or Active (visible templates for choosing in the cryo mask). To edit an existing contract, double-click the desired row. Deleting a contract is only possible if it is not being used.

Edit contract template: opens MS Word to enable creation and editing of templates used for cryo contracts. Only change the content of these templates and never the grey colour placeholders. The program requires them for the correct transferring of data.

Sezione fatture.

Automatically create invoice number: If this option is checked, it will apply a predefined rule to generate a number once <a href="/index.php?title=How_to_create_a_new_cryo_invoice%3F"> every invoice is created</a>.

Actions and document templates:

Invoice: the first invoice created.
- Dunning level 1: first document emitted if payment for the invoice has not been done.
- Dunning level 2: second document emitted if payment for the invoice has not been done.
- Dunning level 3: third and final document emitted if payment for the invoice has not been done.
- Description: describes the content of the document. This information appears when navigating through Administration of documents for a patient.
- Action: describes what action is taken when creating the document. This information appears when navigating through Outstanding invoices and on individual invoices for a patient.
- Word templates: option to create and edit template of documents. A few options are available when clicking the Edit button: Create new document prompts for a Template name and opens MSWord so it is possible to create a brand new document. To edit, delete or rename an existing template, select the desired template and choose one of the options.

Automatically create invoice title: sets the name for the created invoice according to the information provided by this setting. If this option is unchecked, when creating a new invoice, no name will be automatically created, although it will still be possible to click on the auto generate button or enter the desired name. If (from month / year – until month / year) is checked, it also includes month and year to the name.

Standard format for invoice: choose a default format for your invoices.
Reaction period: the amount of days the patient has to pay an invoice.

<img src="/images/plus48.png" alt="" width="48" height="48" />	<a href="/index.php?title=MedITEX_IVF_Settings#Cryo_storage">Click here</a> to read more about the settings of the Cryo storage.
	<a href="/index.php?title=Cryo_storage">Click here</a> to read more about Cryo storage.
	<a href="/index.php?title=Cryo_contracts_and_accounting">Click here</a> to read more about Cryo contracts and accounting.
<a href="/index.php?title=MedITEX_IVF_how_to#Cryo_contracts_and_invoicing"><img src="/images/howto48.png" alt="" width="48" height="48" /></a>	<a href="/index.php?title=MedITEX_IVF_how_to#Cryo_contracts_and_invoicing">Click here</a> to read our How to page.

Donation / surrogate motherhood

To edit the Settings of Donation / surrogate motherhood click on the menu item System -> Configuration / administration -> Settings -> System -> Functions -> Donation / surrogate motherhood.

Tab Funzioni - Donazione / madre in surroga

Donor:

If this box is checked you can only see an anonymous ID when viewing donations.

Furthermore, you can specify how long the rest period for donors and how many oocytes can be donated at one intervention.

Contact letter:

Create / customize template: create or edit the template for your contact letter.

Edit SQL: if you have permission, you can press this button to edit the SQL.

Blood groups ranking for donor reservations: activates the blood group ranking for donor reservations. If you link a donor, you can see how good the compatibility of the blood groups is.

Define blood group compatibility.

With this button, you can choose the compatibilities of blood groups. The following window will be opened:

Weight of compatibility: choose the weight of the compatibility with colours. The description of the colours is explained at the top of this window. Click on the fields in the table and choose the appropriate colour.

Initialise: with this button you can initialise the table settings. Without settings makes the whole table empty. With settings makes the main diagonal green. Set all combinations with will fill the whole table with your chosen colour and Standard will fill the table with good compatibility.

Mirror modifications automatically mirrors modifications to automatically reflect the set points on the diagonal of the table.

<a href="/index.php?title=Search_for_suitable_patient#Search_area">Click here</a> to go directly to the search for donor page, where you can use this feature.

Presentation options

General

To edit the Settings of the overall Presentation options click on the menu item System -> Configuration / administration -> Settings -> System -> Presentation options -> General.

General presentation options.

Window settings: here you can set whether the view of the main window (height, width, position) will be stored and should be resorted at the next login. This option saves the presentation of the program individually for each user. So different users might have slightly different interfaces.

<a href="/index.php?title=Cycle_Overview">Cycle</a>: settings for changing the interface of the calendar.

<a href="/index.php?title=Cycle_Culture">Culture</a>: under culture, you can choose the number of days at the graphical representation.
- You can set the sorting of oocytes and embryos of the culture window. You can choose between sorting according to quality (the best first) or according to the relative oocyte ID.
- Displays the original treatment of the thawed PNs and embryos in the graph view.

Statistics

To edit the Settings of Statistics click on the menu item System -> Configuration / administration -> Settings -> System -> Presentation options -> Statistics.

Statistical presentation options.

In the section Statistics, you can determine how your charts will be displayed in the reports. With this setting, your reports will always be consistent.

Colours

To edit the Settings of Colours click on the menu item System -> Configuration / administration -> Settings -> System -> Presentation options -> Colours.

You can use colours in the different sections of MedITEX IVF, for example in the section <a href="/index.php?title=Cryo_storage">Cryo storage</a>.

Coloured presentation options.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/ColourUse.png" alt="" width="180" height="27" />	Check this option if you wish to use custom colours only.

Choose a colour:

You can choose a colour by scrolling through the entire colour palette. If you wish to use standardized colour values, you can enter RGB values numerically. The currently selected colour will be shown in a small preview window.

Click OK and the colour will be displayed in the list on the left side. The colour code of your operating system will be used for the description of the colour.

To change the description, click on the text next to the colour.

Interfaces

Only change the interface settings if you are sure what these changes will do in the program. Otherwise there may be functionality errors or complete failure of certain functions.

Internal

To edit the Settings of Internal interfaces click on the menu item System -> Configuration / administration -> Settings -> System -> Interfaces -> Internal.

Internal interface settings.

In order to change file paths, click the directory symbol on the right side of the respective row. A dialog window will open and you can change the file path accordingly.

External

To edit the Settings of External interfaces click on the menu item System -> Configuration / administration -> Settings -> System -> Interfaces -> External.

External interface settings.

On this page you should include the path for importing or exporting Data from different programs.

In order to change file paths, click the directory button on the right side of the respective row. A dialog window will open and you can change the file path accordingly.

SMS Account

SMS Account settings.

Tabelle di sistema

To edit the Settings of System tables click on the menu item System -> Configuration / administration -> Settings -> System -> System tables.

In the section System tables you can modify different values within the program accordingly. You can, for example, define additional measures for a cycle. These can then be shown as a selection field in the cycle.

Overview system tables.

<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/Plus.png" alt="" width="23" height="23" />	Press New entry and enter the additional measure in the new line. Subsequently, the new additional measure will be displayed. The program will order the list alphabetically.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/EditSemen.png" alt="" width="28" height="26" /> <img style="display: block; margin-left: auto; margin-right: auto;" src="/images/DeleteX.png" alt="" width="28" height="24" />	You can edit or delete the contents of the tables at any time. However, the predefined entries cannot be edited or deleted.

There is one exception:

Exception: Medical history: entry type with the possibility of a colored text.

At the table Medical history: entry type you have more functionalities, as in the others. Here you can add additionally a text colour and if the Item should be shown in the main window.

Here we are in the main window. You can see the different types of informations in their colours.

You can also go to the system tables from the medical history page:

To edit the entries of medical history

click on the menu item System -> Configuration / administration -> Settings -> System -> System tables or

click on the button Medical history -> New entry -> Administrate entries.

In this list you can see all existing possibilities for entries at the medical history area.

Staff

To edit the Settings of Staff click on the menu item System -> Configuration / administration -> Settings -> Staff.

Link to MedITEX Administration for staff settings.

Drugs

To edit the Settings of Drugs click on the menu item System -> Configuration / administration -> Settings -> Drugs.

The section Drugs contains a fixed list of the most important products used in the field of reproductive medicine.

Besides, you can also define additional long-term and pill products that are used in your medical centre.

List of drugs.

<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/NewDrug.png" alt="" width="154" height="26" />	New drug: add a new drug.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/DeleteDrug.png" alt="" width="152" height="25" />	Delete drug: only drugs you have added yourself can be deleted by pressing this button.

The list of drugs contains products in the groups Gonadotropin, GnRH Analogon, hCG, Progesterone, Gestagen, Estrogen, Antiestrogen and Pill according to the current Red List^®.

The list of drugs is provided and updated by CRITEX and cannot be changed by the user.

If you do not wish to use this drug, uncheck the box Active or double-click on the drug to open the drug editor. There you can uncheck the box Active. Now, the drug will not be available for selection in any window of the program.

Press the column header to sort the entries according to their names, to reverse the sorting or to filter the list. <a href="/index.php?title=Welcome_to_MedITEX_IVF#Managing_Lists">Read here</a> how to manage lists.

Active drugs.

<a href="/index.php?title=How_to_add_new_drugs%3F">Click here</a> to read more about adding new drugs.

Material

To edit the Settings of Material click on the menu item System -> Configuration / administration -> Settings -> Material.

In the section Material you can enter data concerning material groups, manufacturers and products. You can also create different batches and activate them for a certain period of time.

Articles / Batches

To edit the Settings of Articles / Batches click on the menu item System -> Configuration / administration -> Settings -> Material -> Articles / Batches.

On this tab, you can add the needed materials to the list and make them available for the creation of QM fields.

Articles / Batches.

Press this button on the right to add a new article/batch.

Delete it with this button.

This is only possible if articles have not been assigned to QM fields or are being used. Should this be the case, deactivate the item by unchecking the box Active. This data will then be hidden without being deleted.

Articles can only be deleted if they have not yet been used.

<a href="/index.php?title=How_to_add_material_articles_/_batches%3F">Click here</a> to read more about adding new material and articles.

Manufacturer

To edit the Settings of Manufacturer click on the menu item System -> Configuration / administration -> Settings -> Material -> Manufacturer.

You can see a list of all existing manufactures on the tab Manufacturer.

Manufacturer.

Press this button on the top right to add a new manufacturer.

Delete it with this button.

This is only possible if manufactures have not been assigned to QM fields or are being used. Should this be the case, deactivate the item by unchecking the box Active. This data will then be hidden without being deleted.

Manufacturers can only be deleted if they have not yet been used.

<a href="/index.php?title=How_to_add_material_manufacturer%3F">Click here</a> to read more about adding new manufacturers.

Groups

To edit the Settings of Groups click on the menu item System -> Configuration / administration -> Settings -> Material -> Groups.

On this tab, you can create a new material group, for example probes. Here you can see a list of all existing groups.

Groups.

Press this button on the top right to create a new group.

Delete a group with this button.

This is only possible if groups have not been assigned to QM fields or are being used. Should this be the case, deactivate the item by unchecking the box Active. This data will then be hidden without being deleted.

Groups can only be deleted if they have not yet been used.

<a href="/index.php?title=How_to_add_material_groups%3F">Click here</a> to read more about adding new manufacturers.

Lab

To edit the Settings of Lab click on the menu item System -> Configuration / administration -> Settings -> Lab.

List of lab values.

Explanation of the columns:

Area: type of the lab value like: Hormones, Serology, Clinical chemistry, Genetics or Microbiology.
Group: defines the groups of laboratory values as: Blood count, Coagulation, Genotype, Family history, etc.
Param. short name: abbreviation of the parameter name.
Parameter name: full name of the parameter.
Unit: value specified unit. This can be customized in the laboratory parameter editor.
Reference unit: through the button Restore reference units all changed parameters units are adjusted to the value of the reference units.
Show in main window: if this box is checked, the laboratory value is displayed in the Lab test in the main window.
Show in cycle overview: if this box is checked, the laboratory value is displayed in the Cycle overview.
Use for multiple entry in female lab: when activating this field, the parameter appears in the list of female multiple entry.
Use for multiple entry in male lab: when activating this field, the parameter appears in the list of male multiple entry.
Finding validity period: decide here on the findings validity of the selected parameters.

Lab order templates.

<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/Plus.png" alt="" />	Press this button on the top right to add a new laboratory value.
<img src="/images/DeleteX.png" alt="" width="26" height="24" />	Delete an existing laboratory value with this button.
<img src="/images/RestoreLab.png" alt="" width="200" height="28" />	Through this button all changed parameters units are adjusted to the value of the reference units.

<a href="/index.php?title=How_to_add_/_edit_a_laboratory_parameter%3F">Click here</a> to read more about adding laboratory parameters.

Cryo storage

To edit the Settings of Cryo storage click on the menu item System -> Configuration / administration -> Settings -> Cryo storage.

In the section Cryo storage you can manage all cryo canisters and their storage system. You can define up to three hierarchic storage levels per canister. Their filling level can be checked in the freezing section to determine free space.

Cryo storage dimensioning.

<img src="/images/CryoFreeze.png" alt="" />	Freeze with cryo storage: You can choose which type you will freeze in your cryostorage: samples of women, samples of men, or both. This information is important because it is displayed in the <a href="/index.php?title=Cryo_storage#Cryostorage_overview">Cryo storage Overview</a>.
<img src="/images/ChangeLocation1.png" alt="" width="276" height="33" />	Here you can switch between your different cryo storage locations, if you have more then one.
<img src="/images/ChangeLocation.png" alt="" width="44" height="27" />	Modify the location of the selected container.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/Plus.png" alt="" />	Press this button to add a new unit. For more information about adding a new unit, read <a href="/index.php?title=How_to_add_a_new_canister_to_the_cryo_storage%3F">here</a>.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/DeleteX.png" alt="" width="26" height="24" />	Select the unit you wish to delete and click this button.
<img src="/images/MaxNum.png" alt="" width="369" height="28" />	Enter here the maximum number of frozen straws in the last level. It helps you for searching an empty place, if you are freeze a new straw in the freezing section.

Storage dimensioning example.

Storage dimensioning:

When a new unit is created, the following fields have to be filled:
- Description
- Type
- Storage levels

Type: you can also determine whether oocytes and embryos ("Ooc./emb.") or sperms (“Sperm”) will be stored in a given unit.

It is possible to modify the name of the allocation units. Select an existing unit by clicking on it in the column Allocation unit and edit Description, Type and Storage levels accordingly.

<a href="/index.php?title=How_to_add_a_new_canister_to_the_cryo_storage%3F">Click here</a> to learn how to add a new canister to the Cryo storage.

Incubator

To edit the Settings of Incubator click on the menu item System -> Configuration / administration -> Settings -> Incubator -> Incubator.

Incubator settings.

Incubator administration:

Active: here you can see whether the incubator is set to Active.
Manufacturer: registered Manufacturer of the incubator.
Model: model/type of the incubator.
Location of incubator: the place where the incubator is used.
Description: special or specific notes about the incubator.
Incubator no: enter a number to each incubator in order to distinguish them.

Incubator documents:

You can see the documents of a selected incubator.

Date: creation date of the document.
Description: short description with important information.
Filename: name of the stored protocol.
Protocol: stored notes.

Get more information about the adding and editing an incubator, .

<a href="/index.php?title=How_to_add_/_edit_an_incubator%3F">Click here</a> to read more about adding incubators.

Free / QM fields

To edit the Settings of Free / QM fields click on the menu item System -> Configuration / administration -> Settings -> Free / QM fields.

Here you can configure all QM and free fields. QM stands for Quality Management and gives you an option to document all the extra information relevant to you with the help of QM fields.

Staff, material, times and further free fields can be assigned to any QM field – and therefore every associated input area - in the settings.

Settings of free / QM fields.

Buttons with a blue dotted frame have special functionalities. Click on it to have more information.

<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/Plus.png" alt="" />	This button is placed at the QM assignment selection. It allows you to define or add new sub items.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/DeleteX.png" alt="" />	This button is placed at the QM assignment selection. You can delete articles from this area.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/LeftRight.png" alt="" width="29" height="64" />	Use this buttons between QM domain assignment and QM assignment selection to assign a selected entry (right) to a QM field (left) or delete an entry from the QM domain assignment (left).
<a href="/index.php?title=How_to_configure_items%3F"><img style="display: block; margin-left: auto; margin-right: auto; border: 2px dotted blue;" src="/images/QMEdit.png" alt="" width="24" height="23" /></a>	Configuration: add or edit members of staff, material or values.
Three QM types:
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/O.png" alt="" />	Staff: type of personnel.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/L.png" alt="" />	Material: materials and batch numbers.
<img style="display: block; margin-left: auto; margin-right: auto;" src="/images/F.png" alt="" />	Free fields: any additional information.

QM fields:

A list of all QM fields in MedITEX IVF.

The number and description of QM fields cannot be changed by the user.

In the example, the field Follicle aspiration is selected.

Items assigned to the selected QM field:

In this column, you can see all items assigned to the selected QM field (Follicle aspiration).

Entries are separated in the three types, which are represented by symbols.

Pool of all available items:

This column displays all positions that have already been defined for all QM domains (QM fields).

They represent a range of items that can be assigned according to the user needs.

Press the column header to sort the items by their names, type or description.

There are several options available to edit the items assigned to a QM field. Read more about it on our <a href="/index.php?title=MedITEX_IVF_how_to#QM_.2F_free_fields">How to</a> section.

Tips for managing QM fields:

Access to settings and the possibility to modify the program should only be given to the MedITEX Administrator/Representative.
Try to avoid the frequent adding and removing of items in the column QM assignment selection. Instead, try to create a logical system in which existing items can be modified in the column QM assignment selection (for example, modifying of material and staff).
Update the QM settings regularly.
Deleting items in the column QM assignment selection can be risky. Try to avoid this and instead only remove assigned items from the column QM domain assignment (right arrow between columns).
You do not have to define times in the settings. After pressing the QM fields in the program, you can determine a start and end time.
You do not have to define comments in the settings. After pressing the QM fields in the program, you can add a comment to all items.
Not matter if staff, material or free field, you can add staff and a list of values to any item. Combine materials and staff in one entry.

<a href="/index.php?title=MedITEX_IVF_manual">Back to the MedITEX IVF menu </a>

MedITEX IVF Impostazioni

From MedITEX - Wiki

Revision as of 09:54, 13 April 2016

Contents

Clinica

Sistema

Funzioni

Generale

Generazione ID automatica

Report editor

Spermiogramma

Ciclo

Farmaco

Contratti crio e fatturazione

Donation / surrogate motherhood

Presentation options

General

Statistics

Colours

Interfaces

Internal

External

SMS Account

Tabelle di sistema

Staff

Drugs

Material

Articles / Batches

Manufacturer

Groups

Lab

Cryo storage

Incubator

Free / QM fields

@@ Line 1: / Line 1: @@
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
-<td>[[Image:Impostazioni_1_IT.png|none|740px|thumb|left|link=http://wiki.meditex-software.com/images/Impostazioni_1_IT.png| Impostazioni.]]</td>
+<td style="text-align: center;">[[Image:Impostazioni_1_IT.png|none|740px|thumb|left|link=http://wiki.meditex-software.com/images/Impostazioni_1_IT.png| Impostazioni.]]</td>
 </tr>
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p><strong>Definire la propria struttura.</strong></p>
+<p style="text-align: justify;"><strong>Definire la propria struttura.</strong></p>
-<p>Le Impostazioni MedITEX IVF&nbsp;sono della <strong>massima importanza</strong>. Essi consentono di adattare il programma alle condizioni e circostanze specifiche del Centro.</p>
+<p style="text-align: justify;">Le Impostazioni MedITEX IVF&nbsp;sono della <strong>massima importanza</strong>. Essi consentono di adattare il programma alle condizioni e circostanze specifiche del Centro.</p>
-<p>Questo include l'aggiunta o la modifica di farmaci, la gestione dei materiali utilizzati e le interfacce con programmi di laboratorio e di fatturazione, la definizione degli incubatori e l'organizzazione della criobanca. In questa sezione &egrave; anche possibile definire campi liberi/QM e il contenuto di particolari tabelle di sistema.</p>
+<p style="text-align: justify;">Questo include l'aggiunta o la modifica di farmaci, la gestione dei materiali utilizzati e le interfacce con programmi di laboratorio e di fatturazione, la definizione degli incubatori e l'organizzazione della criobanca. In questa sezione &egrave; anche possibile definire campi liberi/QM e il contenuto di particolari tabelle di sistema.</p>
-<p><strong>La definizione completa e corretta delle impostazioni &egrave; un'attivit&agrave; cruciale da svolgere prima di cominciare ad utilizzare MedITEX IVF.&nbsp;</strong><strong>&nbsp;</strong></p>
+<p style="text-align: justify;"><strong>La definizione completa e corretta delle impostazioni &egrave; un'attivit&agrave; cruciale da svolgere prima di cominciare ad utilizzare MedITEX IVF.&nbsp;</strong><strong>&nbsp;</strong></p>
-<h2>Clinica</h2>
+<h2 style="text-align: justify;">Clinica</h2>
-<p>Per modificare le impostazioni della clinica &egrave; sufficiente cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Clinica.</strong><strong><br /></strong></p>
+<p style="text-align: justify;">Per modificare le impostazioni della clinica &egrave; sufficiente cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Clinica.</strong><strong><br /></strong></p>
 <table style="margin-left: auto; margin-right: auto;" border="0">
 <tbody>
@@ Line 20: / Line 20: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li style="text-align: justify;">Qui si possono inserire i dettagli di contatto del centro e visualizzare l'<strong>ID della clinica</strong>.</li>
 </ul>
@@ Line 26: / Line 26: @@
 <li>Inserire e modificare l'<strong>alias della clinica</strong>, il&nbsp;<strong>nome del medico responsabile del centro</strong>&nbsp;e <strong>altri dati</strong>.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li style="text-align: justify;">Se nel Database sono impostate <strong>diverse cliniche</strong>, &egrave; possibile <strong>passare</strong> da una all'altra premendo il pulsante <strong>"Posizione"</strong>.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>I campi disabilitati sono riempiti automaticamente al momento dell'installazione. Se si desidera modificarli contattare l'assistenza.</li>
 </ul>
@@ Line 39: / Line 39: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Sistema</h2>
+<h2 style="text-align: justify;">Sistema</h2>
-<p>Per modificare le impostazioni di sistema cliccare su&nbsp;&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Generale.</strong></p>
+<p style="text-align: justify;">Per modificare le impostazioni di sistema cliccare su&nbsp;&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Generale.</strong></p>
-<p><strong><span style="font-size: 1.17em;">Generale</span></strong></p>
+<p style="text-align: justify;"><strong><span style="font-size: 1.17em;">Generale</span></strong></p>
 <table style="margin-left: auto; margin-right: auto;" border="0">
 <tbody>
 <tr>
-<td>[[Image:Impostazioni_3_IT.png|none|740px|thumb|middle|link=http://wiki.meditex-software.com/images/Impostazioni_3_IT.png| Tab Sistema.]]</td>
+<td style="text-align: center;">[[Image:Impostazioni_3_IT.png|none|740px|thumb|middle|link=http://wiki.meditex-software.com/images/Impostazioni_3_IT.png| Tab Sistema.]]</td>
 </tr>
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Percorsi Sistema</strong>: Qui &egrave; possibile definire il percorso utilizzato dalle interfacce esterne di programmi di fatturazione e laboratorio e da MedITEX per la conservazione dei file word utilizzabili nel programma e documenti digitali stampati per ogni singolo paziente. Per modificare questo percorso &egrave; sufficiente cliccare sull'icone di "cartella" posta sulla destra del campo in questione. Dalla finestra di dialogo che si apre sar&agrave; possibile selezionare il nuovo percorso.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Aggiorna generatori tabelle</strong>: Cliccando su questo pulsante i generatori delle tabelle che costituiscono il Database di MedITEX verranno aggiornati. Prima di utilizzare questa funzione &egrave; necessario accertarsi che nessuno stia utilizzando il software e che tutti gli utenti abbiano effettuato il logoff.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Plausibilit&agrave; ed esportazioni</strong>: Da questa sezione &egrave; possibile impostare i messaggi di plausibilit&agrave; che verranno mostrati nelle varie sezione del programma (per esempio &ldquo;Lista base Anfomed&rdquo;). L'opzione DIR (Registro IVF Tedesco) contiene messaggi di plausibilit&agrave; rilevanti solamente per centri con sede nel territorio Tedesco.
 <p>Le opzioni selezionate in questa sezione rappresenterano l'insieme dei messaggi di plausibilit&agrave;, evidenziati attraverso semafori di color rosso, nelle varie sezioni del programma in caso di informazioni mancanti o erroneamente documentate.</p>
@@ Line 71: / Line 71: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h3>Funzioni</h3>
+<h3 style="text-align: justify;">Funzioni</h3>
-<h4>Generale</h4>
+<h4 style="text-align: justify;">Generale</h4>
-<p>Per modificare le impostazioni di funzioni generali cliccare su&nbsp;&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;Generale</strong></p>
+<p style="text-align: justify;">Per modificare le impostazioni di funzioni generali cliccare su&nbsp;&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;Generale</strong></p>
 <table style="margin-left: auto; margin-right: auto;" border="0" width="10" height="24">
 <tbody>
@@ Line 83: / Line 83: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="790" height="1078">
+<table border="0" width="790" height="1078">
 <tbody>
 <tr>
@@ Line 91: / Line 91: @@
 <p><strong>Criteri di ricerca</strong></p>
 <ul>
 <li>Da questa sezione &egrave; possibile selezionare i criteri di ricerca dei pazienti:
 <ul>
 <li>ID Paziente</li>
@@ Line 175: / Line 175: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Generazione ID automatica</h4>
+<h4 style="text-align: justify;">Generazione ID automatica</h4>
-<p>Per modificare i criteri di generazione automatica di particolari ID cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni&nbsp;</strong><strong>-&gt; Generazione ID automatica</strong></p>
+<p style="text-align: justify;">Per modificare i criteri di generazione automatica di particolari ID cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni&nbsp;</strong><strong>-&gt; Generazione ID automatica</strong></p>
-<table border="0" width="10" height="24">
+<table style="margin-left: auto; margin-right: auto;" border="0" width="10" height="24">
 <tbody>
 <tr>
@@ Line 185: / Line 185: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
 <tr>
-<td><img src="/images/Impostazioni_11_IT.png" alt="" width="487" height="143" /></td>
+<td><img style="float: left;" src="/images/Impostazioni_11_IT.png" alt="" width="487" height="143" /></td>
 <td>
 <p><strong>ID paziente automatici</strong></p>
@@ Line 198: / Line 198: @@
 </tr>
 <tr>
-<td><img src="/images/Impostazioni_12_IT.png" alt="" width="485" height="171" /></td>
+<td><img style="float: left;" src="/images/Impostazioni_12_IT.png" alt="" width="485" height="171" /></td>
 <td>
 <p><strong>ID anonimo automatico</strong></p>
@@ Line 210: / Line 210: @@
 </tr>
 <tr>
-<td>&nbsp;<img src="/images/Impostazioni_13_IT.png" alt="" width="489" height="89" /></td>
+<td>&nbsp;<img style="float: left;" src="/images/Impostazioni_13_IT.png" alt="" width="489" height="89" /></td>
 <td>
 <p><strong>Codice identificazione coppia automatici</strong></p>
@@ Line 219: / Line 219: @@
 </tr>
 <tr>
-<td>&nbsp;<img src="/images/Impostazioni_14_IT.png" alt="" width="444" height="142" /></td>
+<td>&nbsp;<img style="float: left;" src="/images/Impostazioni_14_IT.png" alt="" width="444" height="142" /></td>
 <td>
 <p><strong>Numeri laborder automatici</strong></p>
@@ Line 228: / Line 228: @@
 </tr>
 <tr>
-<td>&nbsp;<img src="/images/Impostazioni_15_IT.png" alt="" width="443" height="109" /></td>
+<td>&nbsp;<img style="float: left;" src="/images/Impostazioni_15_IT.png" alt="" width="443" height="109" /></td>
 <td>
 <p><strong>Regola generazione ID criocarrier quando si congelano pi&ugrave; criocarriers</strong></p>
@@ Line 238: / Line 238: @@
 </tr>
 <tr>
-<td>&nbsp;<img src="/images/Impostazioni_16_IT.png" alt="" width="444" height="94" /></td>
+<td>&nbsp;<img style="float: left;" src="/images/Impostazioni_16_IT.png" alt="" width="444" height="94" /></td>
 <td>
 <p><strong>Ulteriore numero identificativo fatturazione</strong></p>
@@ Line 248: / Line 248: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Report editor</h4>
+<h4 style="text-align: justify;">Report editor</h4>
-<p>Questa sezione descrive le impostazione per <strong>Report editor</strong>.</p>
+<p style="text-align: justify;">Questa sezione descrive le impostazione per <strong>Report editor</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 259: / Line 259: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>Per modificare le <strong>Impostazioni&nbsp;</strong>di&nbsp;<strong>Report editor</strong> cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni-&gt;</strong><strong>&nbsp;Report editor</strong>.</p>
+<p style="text-align: justify;">Per modificare le <strong>Impostazioni&nbsp;</strong>di&nbsp;<strong>Report editor</strong> cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni-&gt;</strong><strong>&nbsp;Report editor</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 268: / Line 268: @@
 </tbody>
 </table>
-<p><strong>Template Lettere</strong>: In questa sezione &egrave; possibile definire le propriet&agrave; del logo della clinica che potr&agrave; essere inserito nei template delle lettere create con report editor.</p>
+<p style="text-align: justify;"><strong>Template Lettere</strong>: In questa sezione &egrave; possibile definire le propriet&agrave; del logo della clinica che potr&agrave; essere inserito nei template delle lettere create con report editor.</p>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Sigla Clinica</strong>: Se il centro opera in diverse sedi &egrave; possibile creare templete personalizzati per ogniuna delle sedi. I tasti di posizione permettono di selezionare le varie sedi.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Requisiti grafici per segnaposti addizionali</strong>: &egrave; possibile definire le dimensioni delle immagini di cellule ed ecografie utilizzate nelle lettere e il numero di immagini per riga, permettendo di ottenere sempre un modello uguale di referto.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Impostazioni WOMOD (Moduli word)</strong>: Creare/Modificare il template di default.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Gestisci lettere</strong>: Permette di visualizzare la sezione di amministrazione di tutte le lettere gestite dal programma.</li>
 </ul>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 292: / Line 292: @@
 <tbody>
 <tr>
-<td style="text-align: left;"><a href="#top">Inizio pagina</a></td>
+<td style="text-align: right;"><a href="#top">Inizio pagina</a></td>
 </tr>
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Spermiogramma</h4>
+<h4 style="text-align: justify;">Spermiogramma</h4>
-<p>Per modificare le&nbsp;<strong>impostazioni</strong>&nbsp;degli <strong>spermiogrammi&nbsp;</strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -</strong><strong>&gt; Spermiogramma</strong>.</p>
+<p style="text-align: justify;">Per modificare le&nbsp;<strong>impostazioni</strong>&nbsp;degli <strong>spermiogrammi&nbsp;</strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -</strong><strong>&gt; Spermiogramma</strong>.</p>
 <table style="margin-left: auto; margin-right: auto;" border="0">
 <tbody>
@@ Line 308: / Line 308: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li>
 <p><strong>Utilizza linea guida WHO [A+B]</strong>: Permette di scegliere tra l'utilizzo di tre o quattro parametri per la motilit&agrave; - motilit&agrave; prograssiva (PR), motilit&agrave; locale (NP) &nbsp;e immotilit&agrave; (IM) come specificato dalla linea guida WHO attuale per l'analisi del liquido seminale (parametri A e B insieme per calcolo PR, C e D separati per calcolo di NP e IM).</p>
 </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Quality assessment spermiogr.</strong>: Attivazione della quality assessment con relativa aggiunta automatica dei dati di default inseriti</li>
 </ul>
@@ Line 322: / Line 322: @@
 </ul>
 </blockquote>
-<ul>
+<ul style="text-align: justify;">
 </ul>
 <blockquote>
@@ Line 332: / Line 332: @@
 </ul>
 </blockquote>
-<ul>
+<ul style="text-align: justify;">
 <li><a href="/index.php?title=MedITEX_IVF_Settings#System_tables"><img style="border: 2px dotted blue; float: left;" src="/images/EditSemen.png" alt="" width="31" height="26" /></a>&nbsp;Permette di spostarsi nella sezione delle tabelle di sistema per aggiungere o modificare <strong>postazioni/unit&agrave;. </strong>Successivamente le nuove &nbsp;opzioni <strong>potranno essere scelte</strong> nella sezione di quality assesment.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Periodo minimo di quarantena per liquido seminale</strong>: Giorni di quarantena per il liquido seminale crioconservato. Liquidi seminali di donatori con valori di HEP B, HEP C, TPHA e HIV positivi, o quelli che non hanno raggiunto il periodo minimo di quarantena non possono essere scongelati o utilizzati.</li>
 </ul>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 354: / Line 354: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Ciclo</h4>
+<h4 style="text-align: justify;">Ciclo</h4>
-<p>Per modificare le<strong>&nbsp;<strong>impostazioni</strong>&nbsp;</strong>dei&nbsp;<strong>Cicli&nbsp;</strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;Ciclo</strong></p>
+<p style="text-align: justify;">Per modificare le<strong>&nbsp;<strong>impostazioni</strong>&nbsp;</strong>dei&nbsp;<strong>Cicli&nbsp;</strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;Ciclo</strong></p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 366: / Line 366: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li>Overview Calendario: &egrave; possibile impostare i giorni di weekend</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong><a href="/index.php?title=Cycle_Culture">Coltura</a></strong>: Attivare il calcolo automatico del punteggio e della media nella <a href="/index.php?title=Cycle_Culture#Graphical_representation"><strong>Rappresentazione Grafica</strong></a>&nbsp;della coltura.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><a href="/index.php?title=Cycle_Pregnancy"><strong>Gravidanza</strong></a>: La settimana gestionale verr&agrave; calcolata basandosi sull'opzione scelta in questa sezione. Si possono scegliere 40 o 38 settimane.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><a href="/index.php?title=Cycle_Transfer"><strong>Transfer</strong></a>: Seguendo le disposizioni di legge del proprio paese &egrave; possibile impostare il numero massimo di embrioni da trasferire.</li>
 </ul>
@@ Line 385: / Line 385: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Farmaco</h4>
+<h4 style="text-align: justify;">Farmaco</h4>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table border="0">
+<table style="margin-left: auto; margin-right: auto;" border="0">
 <tbody>
 <tr>
@@ Line 396: / Line 396: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Contratti crio e fatturazione</h4>
+<h4 style="text-align: justify;">Contratti crio e fatturazione</h4>
-<p>Per modificare le<strong>&nbsp;<strong>impostazioni</strong>&nbsp;</strong>dei&nbsp;<strong>Crio contratti e fatture </strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;C<span style="font-size: 1em;">ontratti crio e fatturazione.</span></strong></p>
+<p style="text-align: justify;">Per modificare le<strong>&nbsp;<strong>impostazioni</strong>&nbsp;</strong>dei&nbsp;<strong>Crio contratti e fatture </strong>cliccare su&nbsp;<strong>Sistema -&gt; Configurazione/Amministrazione -&gt; Impostazioni -&gt; Sistema-&gt; Funzioni -&gt;C<span style="font-size: 1em;">ontratti crio e fatturazione.</span></strong></p>
 <table style="margin-left: auto; margin-right: auto;" border="0" width="805" height="24">
 <tbody>
@@ Line 407: / Line 407: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Attivo-Fatturazione con MedITEX IVF o Accounting</strong>: L'opzione Fatturazione con MedITEX IVF &egrave; selezionata di default. Permette la creazione di criocontratti e fatture per i pazienti. <strong><strong>Se l'opzione &egrave; deselezionata, tutte le funzionalit&agrave; riguardanti i contratti e la fatturazione saranno disabilitate nel programma.</strong></strong></li>
 </ul>
-<table border="0" width="805" height="24">
+<table style="margin-left: auto; margin-right: auto;" border="0" width="805" height="24">
 <tbody>
 <tr>
@@ Line 417: / Line 417: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table style="margin-left: auto; margin-right: auto;" border="0" width="778" height="1">
 <tbody>
@@ Line 425: / Line 425: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li style="text-align: justify;"><strong>Automatically create contract number</strong>: if this  option is checked, it will apply a predefined rule to generate a number  once every <a href="/index.php?title=Create_a_new_entry_in_demographics">cryo contract</a> is created in the <a href="/index.php?title=Demographics">demographics</a>.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>
 <p style="text-align: justify;"><strong>Contract types</strong>: a list with all types of contracts that can be issued. With the <strong>"Plus"</strong> button, you can add a new type of contract. Do this by  specifying    the <strong>name</strong>, <strong>frequency </strong>and <strong>amount </strong>in the new window. Here, you can    also set whether a contract is used as a&nbsp;<strong>Standard </strong>(template for every contract) or <strong>Active</strong> (visible templates for choosing in the cryo mask). <span id="result_box" lang="en"><span class="hps">To</span> <span class="hps">edit an existing</span> <span class="hps">contract</span><span>, double-click</span> <span class="hps">the desired row</span><span>.</span></span><span id="result_box" lang="en"><span> </span></span><span id="result_box" lang="en"><span class="hps">Deleting a</span> <span class="hps">contract</span> <span class="hps">is only possible</span> <span class="hps">if</span> <span class="hps">it is not being used</span><span>.</span></span></p>
 </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Edit contract template</strong>: opens MS Word to enable     creation and editing of templates used for cryo contracts. Only change  the content of these templates and never the grey colour placeholders.  The    program requires them for the correct transferring of data.</li>
 </ul>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table style="margin-left: auto; margin-right: auto;" border="0">
 <tbody>
@@ Line 447: / Line 447: @@
 </tbody>
 </table>
-<p><strong>Actions and document templates</strong>:</p>
+<p style="text-align: justify;"><strong>Actions and document templates</strong>:</p>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Invoice</strong>: the first invoice created.
 <ul>
 <li><strong>Dunning level 1</strong>: first document emitted if payment for the invoice has not been done.</li>
@@ Line 460: / Line 460: @@
 </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Automatically create invoice title</strong>: sets the name   for  the  created invoice according to the information  provided by this    setting.  If this option is unchecked, when creating a  new invoice,   no  name will  be automatically created, although it will  still be   possible  to click on  the auto generate button or enter the desired   name. If  (from month / year &ndash; until month / year) is checked, it also   includes  month and year to the name.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>
 <p><strong>Standard format for invoice</strong>: <span id="result_box" class="short_text" lang="en"><span class="hps">choose a default</span> <span class="hps">format</span> <span class="hps">for</span> <span class="hps">your invoices.</span></span></p>
@@ Line 471: / Line 471: @@
 </li>
 </ul>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 496: / Line 496: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Donation / surrogate motherhood</h4>
+<h4 style="text-align: justify;">Donation / surrogate motherhood</h4>
-<p>To edit the <strong>Settings </strong>of <strong>Donation / surrogate motherhood</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Functions -&gt; Donation / surrogate motherhood.</strong></p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Donation / surrogate motherhood</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Functions -&gt; Donation / surrogate motherhood.</strong></p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 507: / Line 507: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="768" height="311">
+<table border="0" width="768" height="311">
 <tbody>
 <tr>
@@ Line 536: / Line 536: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 576: / Line 576: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 583: / Line 583: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h3>Presentation options</h3>
+<h3 style="text-align: justify;">Presentation options</h3>
-<h4>General</h4>
+<h4 style="text-align: justify;">General</h4>
-<p>To edit the <strong>Settings </strong>of the overall <strong>Presentation options</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; General</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of the overall <strong>Presentation options</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; General</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="69" height="24">
+<table border="0" width="69" height="24">
 <tbody>
 <tr>
@@ Line 596: / Line 596: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Window settings</strong>: here you can set whether the view   of  the main window (height, width, position) will be stored and    should be resorted at the next login. This option saves the presentation  of the program individually for each user. So different users might  have slightly different interfaces. </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><a href="/index.php?title=Cycle_Overview"><strong>Cycle</strong></a>: settings for changing the interface of the calendar.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>
 <p style="text-align: justify;"><a href="/index.php?title=Cycle_Culture"><strong>Culture</strong></a>: under culture, you can choose the number of days at the graphical representation.</p>
@@ Line 613: / Line 613: @@
 </li>
 </ul>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 620: / Line 620: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Statistics</h4>
+<h4 style="text-align: justify;">Statistics</h4>
-<p>To edit the <strong>Settings </strong>of <strong>Statistics </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; Statistics</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Statistics </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; Statistics</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="69" height="24">
+<table border="0" width="69" height="24">
 <tbody>
 <tr>
@@ Line 637: / Line 637: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 644: / Line 644: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>Colours</h4>
+<h4 style="text-align: justify;">Colours</h4>
-<p>To edit the <strong>Settings </strong>of <strong>Colours </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; Colours</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Colours </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Presentation options -&gt; Colours</strong>.</p>
-<p>You can use colours in the different sections of MedITEX IVF, for example  in the section&nbsp;<a href="/index.php?title=Cryo_storage"><strong>Cryo storage</strong></a>.&nbsp;</p>
+<p style="text-align: justify;">You can use colours in the different sections of MedITEX IVF, for example  in the section&nbsp;<a href="/index.php?title=Cryo_storage"><strong>Cryo storage</strong></a>.&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 661: / Line 661: @@
 </tbody>
 </table>
-<p><strong>Choose a colour</strong>:</p>
+<p style="text-align: justify;"><strong>Choose a colour</strong>:</p>
-<ul>
+<ul style="text-align: justify;">
 <li>You can choose a colour by scrolling  through the entire  colour   palette. If you wish to use standardized  colour values, you can  enter   RGB values numerically. The currently  selected colour will be  shown  in  a small preview window.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>Click<strong> OK</strong> and the colour will be displayed in the    list on the left side.  The colour code of your operating system will be    used for the description of the colour.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>To <strong>change the description</strong>, click on the text next to the colour.</li>
 </ul>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 678: / Line 678: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h3>Interfaces</h3>
+<h3 style="text-align: justify;">Interfaces</h3>
-<p><strong>Only  change the interface settings if you are sure what  these changes will do in the program.&nbsp; Otherwise there may be  functionality errors or  complete  failure of certain functions.</strong><span style="color: #ff0000;">&nbsp;</span></p>
+<p style="text-align: justify;"><strong>Only  change the interface settings if you are sure what  these changes will do in the program.&nbsp; Otherwise there may be  functionality errors or  complete  failure of certain functions.</strong><span style="color: #ff0000;">&nbsp;</span></p>
-<h4>Internal</h4>
+<h4 style="text-align: justify;">Internal</h4>
-<p>To edit the <strong>Settings </strong>of <strong>Internal </strong>interfaces click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Interfaces -&gt; Internal.</strong></p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Internal </strong>interfaces click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Interfaces -&gt; Internal.</strong></p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 695: / Line 695: @@
 </tbody>
 </table>
-<h4>External</h4>
+<h4 style="text-align: justify;">External</h4>
-<p>To edit the <strong>Settings </strong>of <strong>External </strong>interfaces click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Interfaces -&gt; External</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>External </strong>interfaces click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; Interfaces -&gt; External</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 710: / Line 710: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 717: / Line 717: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h4>SMS Account</h4>
+<h4 style="text-align: justify;">SMS Account</h4>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 727: / Line 727: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h3>Tabelle di sistema</h3>
+<h3 style="text-align: justify;">Tabelle di sistema</h3>
-<p>To edit the <strong>Settings </strong>of <strong>System tables</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; System tables</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>System tables</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; System -&gt; System tables</strong>.</p>
-<p>In the section <strong>System tables</strong> you can modify   different values within the program accordingly. You can,  for example,  define additional measures for a cycle. These can then be  shown as a  selection field in the cycle.</p>
+<p style="text-align: justify;">In the section <strong>System tables</strong> you can modify   different values within the program accordingly. You can,  for example,  define additional measures for a cycle. These can then be  shown as a  selection field in the cycle.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 741: / Line 741: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 758: / Line 758: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p><strong>There is one exception:</strong></p>
+<p style="text-align: justify;"><strong>There is one exception:</strong></p>
 <table border="0">
 <tbody>
@@ Line 767: / Line 767: @@
 </tbody>
 </table>
-<p>At the table <strong>Medical history: entry type</strong> you have <strong>more functionalities</strong>, as in the others. Here you can add additionally a<strong> text colour</strong> and if the Item should be <strong>shown in the main window</strong>.</p>
+<p style="text-align: justify;">At the table <strong>Medical history: entry type</strong> you have <strong>more functionalities</strong>, as in the others. Here you can add additionally a<strong> text colour</strong> and if the Item should be <strong>shown in the main window</strong>.</p>
 <table border="0">
 <tbody>
@@ Line 776: / Line 776: @@
 </tbody>
 </table>
-<p>You can also go to the <strong>system tables from the medical history page</strong>:</p>
+<p style="text-align: justify;">You can also go to the <strong>system tables from the medical history page</strong>:</p>
 <table border="0">
 <tbody>
@@ Line 795: / Line 795: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 802: / Line 802: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Staff</h2>
+<h2 style="text-align: justify;">Staff</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Staff </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Staff</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Staff </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Staff</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 813: / Line 813: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 820: / Line 820: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Drugs</h2>
+<h2 style="text-align: justify;">Drugs</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Drugs </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Drugs</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Drugs </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Drugs</strong>.</p>
-<p>The section <strong>Drugs</strong> contains a fixed list of the most important products used in the field of reproductive medicine.</p>
+<p style="text-align: justify;">The section <strong>Drugs</strong> contains a fixed list of the most important products used in the field of reproductive medicine.</p>
-<p>Besides, you can also define additional long-term and pill products that are used in your medical centre.</p>
+<p style="text-align: justify;">Besides, you can also define additional long-term and pill products that are used in your medical centre.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 834: / Line 834: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 851: / Line 851: @@
 </tbody>
 </table>
-<ul>
+<ul style="text-align: justify;">
 <li>The list of drugs contains products in the groups Gonadotropin, GnRH    Analogon, hCG, Progesterone, Gestagen, Estrogen, Antiestrogen and  Pill   according to the current Red List<sup>&reg;</sup>.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>The list of drugs is provided and updated by CRITEX and cannot be changed by the user.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>If you do not wish to use this drug, uncheck the  box&nbsp;<strong>Active</strong> or double-click on the drug to open the drug editor. There you can uncheck the box <strong>Active</strong>. Now, the drug will not be available for selection in any window of the program.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>Press the column header to sort the entries according to their names, to reverse the sorting or to filter the list. <a href="/index.php?title=Welcome_to_MedITEX_IVF#Managing_Lists">Read here</a> how to manage lists.</li>
 </ul>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 870: / Line 870: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 879: / Line 879: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 886: / Line 886: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Material</h2>
+<h2 style="text-align: justify;">Material</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Material </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Material </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material</strong>.</p>
-<p>In the section<strong> Material</strong> you can enter data concerning material groups, manufacturers and products. You can also create different batches and <strong>activate</strong> them for a certain period of time.</p>
+<p style="text-align: justify;">In the section<strong> Material</strong> you can enter data concerning material groups, manufacturers and products. You can also create different batches and <strong>activate</strong> them for a certain period of time.</p>
-<h3>Articles / Batches</h3>
+<h3 style="text-align: justify;">Articles / Batches</h3>
-<p>To edit the <strong>Settings </strong>of <strong>Articles / Batches</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Articles / Batches</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Articles / Batches</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Articles / Batches</strong>.</p>
-<p>On this tab, you can add the needed materials to the list and make them available for the creation of <strong>QM fields</strong>.</p>
+<p style="text-align: justify;">On this tab, you can add the needed materials to the list and make them available for the creation of <strong>QM fields</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 901: / Line 901: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 918: / Line 918: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 927: / Line 927: @@
 </tbody>
 </table>
-<h3>Manufacturer</h3>
+<h3 style="text-align: justify;">Manufacturer</h3>
-<p>To edit the <strong>Settings </strong>of <strong>Manufacturer </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Manufacturer</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Manufacturer </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Manufacturer</strong>.</p>
-<p>You can see a list of all existing manufactures on the tab <strong>Manufacturer</strong>.</p>
+<p style="text-align: justify;">You can see a list of all existing manufactures on the tab <strong>Manufacturer</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 937: / Line 937: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 954: / Line 954: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 963: / Line 963: @@
 </tbody>
 </table>
-<h3>Groups</h3>
+<h3 style="text-align: justify;">Groups</h3>
-<p>To edit the <strong>Settings </strong>of <strong>Groups </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Groups</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Groups </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Material -&gt; Groups</strong>.</p>
-<p>On this tab, you can create a new material group, for example probes. Here you can see a list of all existing groups.</p>
+<p style="text-align: justify;">On this tab, you can create a new material group, for example probes. Here you can see a list of all existing groups.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="644" height="38">
+<table border="0" width="644" height="38">
 <tbody>
 <tr>
@@ Line 973: / Line 973: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 990: / Line 990: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 999: / Line 999: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,006: / Line 1,006: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Lab</h2>
+<h2 style="text-align: justify;">Lab</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Lab </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Lab</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Lab </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Lab</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,018: / Line 1,018: @@
 </tbody>
 </table>
-<p><strong>Explanation of the columns</strong>:</p>
+<p style="text-align: justify;"><strong>Explanation of the columns</strong>:</p>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Area</strong>: type of the lab value like: Hormones, Serology, Clinical chemistry, Genetics or Microbiology. </li>
 <li><strong>Group</strong>: <span id="result_box" class="short_text" lang="en"><span class="hps">defines the group</span>s <span class="hps">of laboratory values as: Blood count, Coagulation, Genotype, Family history, etc.<br /></span></span></li>
@@ Line 1,039: / Line 1,039: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0" width="528" height="85">
+<table border="0" width="528" height="85">
 <tbody>
 <tr>
@@ Line 1,057: / Line 1,057: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,066: / Line 1,066: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,073: / Line 1,073: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Cryo storage</h2>
+<h2 style="text-align: justify;">Cryo storage</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Cryo storage</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Cryo storage</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Cryo storage</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Cryo storage</strong>.</p>
-<p>In the section <strong>Cryo storage </strong>you can manage all  cryo  canisters and  their storage system. You can define up to three   hierarchic storage  levels per canister. Their filling level can be   checked in the freezing  section to determine free space.</p>
+<p style="text-align: justify;">In the section <strong>Cryo storage </strong>you can manage all  cryo  canisters and  their storage system. You can define up to three   hierarchic storage  levels per canister. Their filling level can be   checked in the freezing  section to determine free space.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,086: / Line 1,086: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0" width="741" height="103">
 <tbody>
@@ Line 1,120: / Line 1,120: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,128: / Line 1,128: @@
 </tbody>
 </table>
-<p><strong>Storage dimensioning:</strong></p>
+<p style="text-align: justify;"><strong>Storage dimensioning:</strong></p>
-<ul>
+<ul style="text-align: justify;">
 <li>When a new unit is created, the following fields have to be filled:
 <ul>
 <li>Description</li>
@@ Line 1,138: / Line 1,138: @@
 </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Type</strong>: you can also determine whether oocytes and embryos ("Ooc./emb.") or sperms (&ldquo;Sperm&rdquo;) will be stored in a given unit.</li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li>It is possible to modify the name of the allocation units. Select an  existing unit by clicking on it in the column&nbsp;<strong>Allocation unit</strong> and  edit <strong>Description</strong>, <strong>Type </strong>and<strong> Storage levels</strong> accordingly.</li>
 </ul>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,152: / Line 1,152: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,159: / Line 1,159: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Incubator</h2>
+<h2 style="text-align: justify;">Incubator</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Incubator </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Incubator -&gt; Incubator</strong>.</p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Incubator </strong>click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Incubator -&gt; Incubator</strong>.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,170: / Line 1,170: @@
 </tbody>
 </table>
-<p><strong>Incubator administration:</strong></p>
+<p style="text-align: justify;"><strong>Incubator administration:</strong></p>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Active</strong>: here you can see whether the incubator is set to&nbsp;<strong>Active</strong>.</li>
 <li><strong>Manufacturer</strong>: registered <strong>Manufacturer </strong>of the incubator.</li>
@@ Line 1,179: / Line 1,179: @@
 <li><strong>Incubator no</strong>: enter a number to each incubator in order to distinguish them.</li>
 </ul>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p><strong>Incubator documents:</strong></p>
+<p style="text-align: justify;"><strong>Incubator documents:</strong></p>
-<p>You can see the documents of a selected incubator.<strong><br /></strong></p>
+<p style="text-align: justify;">You can see the documents of a selected incubator.<strong><br /></strong></p>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Date</strong>: <span id="result_box" class="short_text" lang="en"><span class="hps">creation date</span> <span class="hps">of the document.</span></span></li>
 <li><strong>Description</strong>: short description with important information.</li>
@@ Line 1,188: / Line 1,188: @@
 <li><strong>Protocol</strong>: <span id="result_box" class="short_text" lang="en">stored notes.<span> <br /></span></span></li>
 </ul>
-<p><br />Get more information about the adding and editing an incubator, .</p>
+<p style="text-align: justify;"><br />Get more information about the adding and editing an incubator, .</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,197: / Line 1,197: @@
 </tbody>
 </table>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,204: / Line 1,204: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<h2>Free / QM fields</h2>
+<h2 style="text-align: justify;">Free / QM fields</h2>
-<p>To edit the <strong>Settings </strong>of <strong>Free / QM fields</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Free / QM fields</strong>.<strong><br /></strong></p>
+<p style="text-align: justify;">To edit the <strong>Settings </strong>of <strong>Free / QM fields</strong> click on the menu item <strong>System   -&gt; Configuration</strong><strong> / administration</strong><strong> -&gt; Settings -&gt; Free / QM fields</strong>.<strong><br /></strong></p>
-<ul>
+<ul style="text-align: justify;">
 <li>Here you can configure all <strong>QM </strong>and <strong>free fields</strong>. <strong>QM</strong> stands for Quality Management and gives you an option to document all the extra information  relevant to you with the help of <strong>QM fields</strong>. </li>
 </ul>
-<ul>
+<ul style="text-align: justify;">
 <li><strong>Staff</strong>, <strong>material</strong>, <strong>times</strong> and further <strong>free</strong> <strong>fields</strong> can be assigned to any <strong>QM field</strong> &ndash; and therefore every associated input area - in the settings.</li>
 </ul>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,222: / Line 1,222: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>Buttons with a blue dotted frame have special functionalities. Click on it to have more information.</p>
+<p style="text-align: justify;">Buttons with a blue dotted frame have special functionalities. Click on it to have more information.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,259: / Line 1,259: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
 <table border="0">
 <tbody>
@@ Line 1,306: / Line 1,306: @@
 </tbody>
 </table>
-<p>Press the column header to sort the items by their names, type or description.</p>
+<p style="text-align: justify;">Press the column header to sort the items by their names, type or description.</p>
-<table style="margin-left: auto; margin-right: auto;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,332: / Line 1,332: @@
 </tbody>
 </table>
-<p>&nbsp;</p>
+<p style="text-align: justify;">&nbsp;</p>
-<table style="float: right;" border="0">
+<table border="0">
 <tbody>
 <tr>
@@ Line 1,341: / Line 1,341: @@
 </tbody>
 </table>
-<p><span class="mw-headline"><br /></span></p>
+<p style="text-align: justify;"><span class="mw-headline"><br /></span></p>